How to clean and maintain a Nina Arbore print safely

Framed prints last longer when you avoid the habits that cause damage first. The real risk is not dust. It is moisture, solvents, and the wrong cloth.

Auvrique Editorial · Fine Art Editions

The short answer

Use a dry microfiber cloth for dust and a barely damp cloth for marks. Keep solvents away from the surface. Check the frame seal every year. A print that is handled gently can stay stable for decades. Most damage comes from rubbing too hard or using the wrong cleaner.

What actually damages a framed print

Dust is the least of your worries. The damage usually comes from three things: moisture that creeps behind the glass, solvents that soften the surface, and friction that wears a print down over time. A Nina Arbore print is no different in this respect from any other framed poster. The image sits on paper or canvas, and both surfaces react badly to the wrong touch. The anxious reader is right to worry. The good news is that the risk is mostly avoidable with a few simple habits.

Start by assuming the print is more delicate than it looks. A framed poster can feel solid, but the surface is still a printed layer that can be scratched or dulled. A canvas edition has a little more give, but it still picks up oils from hands and can be marked by rough cloth. The safest rule is to clean only when you need to, and then only with the gentlest method that will do the job.

Cleaning steps that are safe to repeat

The first pass should always be dry. A clean microfiber cloth removes most dust without scratching. Use light pressure and move in one direction rather than scrubbing back and forth. If a mark remains, dampen the cloth with water and wring it out until it is barely moist. Test a corner first if you are unsure. Never spray cleaner directly onto the print or the frame, because liquid can run where you cannot reach it.

For a framed poster, keep the cloth off the glass as much as possible and focus on the frame edges where dust collects. For a canvas edition, avoid any product that leaves a film behind, because that film can change the surface over time. If you are deciding between the two formats before you buy, the choice affects how you handle the piece later, and it is worth reading the comparison before you commit. choose a framed poster

Safe cleaning checklist

Use a dry microfiber cloth for routine dust
Dampen the cloth slightly for stubborn marks
Test a small corner before cleaning the whole surface
Keep liquids away from the frame seal and back
Wash the cloth separately from other laundry

Hanging and placement choices that matter

Where you hang the print changes how often you need to clean it. A spot near a door or a window collects dust faster and is more likely to get bumped. A wall above a radiator or in direct sun will age faster, and no amount of careful cleaning will fully offset that. The anxious buyer usually wants the piece to last, so placement is part of maintenance, not an afterthought.

Check the hanging hardware before you commit to a wall. A print that sits level and secure is easier to keep clean because you are not constantly reaching up to adjust it. If you are unsure whether you need a kit, the hanging question has a practical answer that depends on the frame and the wall rather than the artist. hang a print without a kit Once it is up, a yearly look at the frame corners and the seal is enough for most homes.

Most framed prints are damaged by the cleaner, not by the dust.

Surface	Safe method	Avoid
Framed poster face	Dry microfiber cloth	Spray cleaner, rough cloth
Canvas surface	Dry cloth, light touch	Solvents, abrasive pads
Frame edges	Slightly damp cloth	Excess water, harsh chemicals
Glass	Glass cleaner on cloth	Spray directly on the frame

Key takeaways

Dust with a dry microfiber cloth before reaching for any liquid.
Use only a barely damp cloth for marks, and test a corner first.
Keep solvents, sprays, and rough cloth away from the printed surface.
Check the frame and hanging hardware once a year, not every week.

Related questions

Can I use glass cleaner on the print itself?

No. Glass cleaner is for the glass only, and even then you should put it on the cloth first. Spraying near the frame can send liquid behind the print where it may cause damage over time.

How often should a framed print be cleaned?

Most prints only need dusting occasionally, not a full cleaning. If the room is dusty or the print sits near a doorway, a light dry wipe every few weeks is usually enough.

Does a canvas edition need different care from a framed poster?

The difference is small but real. A canvas surface can tolerate a little more texture, but it still picks up oils and marks from rough handling. A framed poster is usually easier to dust, but its surface can be scratched more easily.

From the Auvrique collection

Made to order · Every size