Framed poster hardware arrives ready for wall mounting

The short answer is yes, but the kit is basic and the wall type decides whether it is enough. This is what ships, what it costs you to install, and where the real hassle sits.

Auvrique Editorial · Fine Art Editions

The short answer

Yes. Each framed poster ships with a basic hanging kit, usually two wall hooks and matching screws, plus a short instruction sheet. The kit is designed for a standard nail or screw already in the wall. If your wall needs a plug or anchor first, that hardware is not included. You will need a drill or a hammer and roughly ten minutes to fit it.

What the kit contains and what it omits

The hardware in the box is deliberately minimal. You get two metal hooks sized for the frame's wire or hanging system, the screws that fit those hooks, and a printed card that shows the spacing. Nothing in the kit handles masonry, plaster over lath, or a wall that has never held a picture before. That gap is the one most buyers hit. The frame itself is finished and ready to hang, so the missing piece is almost always the wall anchor rather than the frame hardware.

If you already have a hook or a screw in the wall from a previous picture, the included kit is usually enough on its own. Measure the hook spacing on the back of the frame before you drill, because the wire or hangers are set for a specific gap. A frame hung from a single central nail will sag unless the wire is tight. The instruction sheet covers that check in a few lines, and it is worth reading before you lift the frame onto the wall.

Tools you will still need on the day

The kit covers the frame side of the job. The wall side is where you will spend the money and the time. For a solid brick or concrete wall you need a drill, a masonry bit, and a wall plug that matches the screw in the kit. For a hollow wall you need a suitable anchor that grips the plaster or drywall without splitting it. A small spirit level helps more than it costs, because a frame hung by eye rarely sits straight on the first try.

The total tool cost is low if you already own a drill. If you do not, a basic drill and a small box of plugs will cost more than the frame hardware itself. That is the practical risk for a buyer who expected the whole job to be self contained. Plan for the wall first and the frame second, because the frame will wait on the floor while you sort the wall.

Hardware checklist

Two wall hooks and matching screws come in the box
A drill and a masonry bit are needed for brick or concrete
A hollow-wall anchor is needed where no stud is behind the plaster
A spirit level keeps the frame straight on the first pass

Where the real installation risk sits

The frame hardware is rarely the problem. The problem is a wall that has never held anything, or a wall that has held something heavier before and now needs a fresh anchor. A framed poster is light enough that most walls will take it, but the word most is doing the work there. If you are hanging on tile, on a skimmed plasterboard partition, or on a wall you have never drilled into, treat the kit as a starting point rather than a complete solution.

The cost of getting this wrong is small in money and larger in hassle. A frame that falls will mark the wall and possibly the frame edge. A second set of plugs and a careful re-drill is usually the fix. None of that is expensive, but it is the reason the kit alone does not finish the job on every wall. Decide what your wall is before you unpack the frame, and the rest is straightforward.

The frame arrives ready to hang. The wall decides whether the kit is enough.

Key takeaways

A basic hanging kit with hooks and screws ships with each framed poster.
The kit does not include wall plugs, anchors, or a drill.
A wall that has never held a picture usually needs extra hardware.
Plan for the wall first, because the frame will wait on the floor.

Related questions

What if my wall is plaster over lath or hollow drywall?

The included hooks and screws will grip a solid stud or a previous anchor, but not bare plaster or hollow drywall on their own. Fit a suitable hollow-wall anchor first, then use the kit screws into that anchor. A stud finder or a small test drill tells you whether you have a solid fix behind the surface.

Can I hang the frame without drilling at all?

Only if the wall already has a hook, nail, or screw at the right height and spacing. Adhesive hanging strips exist for light frames, but they are a separate purchase and they suit smooth painted walls more than textured or freshly painted ones. Check the strip rating against the frame weight before you trust it.

How long does the hanging job usually take?

With a drill and the right plug already to hand, fitting a single framed poster takes roughly ten to fifteen minutes. The longest part is usually finding the right height and checking it with a level. If you need to buy a drill or a set of plugs first, allow extra time for that.

From the Auvrique collection

Made to order · Every size