Guilherme de Santa-Rita prints do not include a hanging kit

The question sounds simple, but the real answer depends on what kind of reproduction you are buying and who supplied the frame. Here is what actually arrives at the door.

Auvrique Editorial · Fine Art Editions

The short answer

A framed Guilherme de Santa-Rita print usually arrives with a basic hanging kit, but not always. Most framed poster editions include two wall hooks and a short length of cord or wire. Canvas editions on stretcher bars are designed to hang from the frame itself and do not need a separate kit. If you want certainty, check the product page before ordering.

What a framed print package contains

A framed poster print is built around a backing board and a frame, with the print surface sealed behind glass or acrylic. The hanging hardware is usually the simplest part of the package. Most suppliers include a pair of metal hooks that screw into the frame backing, plus a short length of wire or cord that runs between them. That is enough to hang the piece on a single nail or a small screw in the wall. The hardware is light, and it is sized for the weight of the framed print rather than for any larger load.

The contents vary by supplier and by the size of the piece. A small framed print may arrive with a single ready made hanger fixed to the back, which removes the need to thread wire at all. A larger framed print is more likely to use two hooks and a wire, because the weight is higher and the wire spreads the load across the frame. Neither setup is complicated, but you should know which one you are getting before the piece arrives.

What changes with a canvas edition

A canvas print on stretcher bars is a different object, and it is usually sold without a frame at all. The canvas is stretched over a wooden frame and fixed at the back, so the piece is meant to hang from the stretcher itself. That means no wire, no hooks, and no separate hanging kit in the box. You fasten the canvas directly to the wall with screws or nails driven through the stretcher frame, or you use a separate hanging system if you want the canvas to sit away from the wall.

If you want a canvas to hang like a framed print, you add a frame later rather than expecting one to arrive with the print. A framed canvas is a different product from an unframed one, and the hardware is different too. The framed version will usually include the same kind of hooks and wire described above. The unframed version will not. If you are buying a canvas and you want the simplest possible hanging setup, the framed option removes the most uncertainty.

A practical reader buying a reproduction wants to know whether they need to buy anything else on arrival. The short answer is that framed prints tend to include the basics, and unframed canvases do not. If you are comparing two products and one lists a hanging kit and the other does not, that is usually the difference between a framed poster and a canvas on stretcher bars. Check the product description. If it is not listed, assume you will need to supply your own hooks or screws.

What to check before ordering

Read the product description for a list of included hardware.
Confirm whether the print is framed or on an unframed stretcher bar.
Measure the framed weight if you plan to use a wall anchor.
Decide whether you want a wire hanger or a fixed hanger on the back.

When the kit is not enough

A basic hanging kit is enough for a normal interior wall and a print of moderate size. It is not always enough for a heavy framed piece, a plaster wall, or a wall that has never been drilled into before. If the framed print is large, the wire and hooks supplied may be fine for hanging but not for the extra care needed to fix the wall fitting securely. In that case the hardware in the box is only the start, and you may need a heavier screw or a wall anchor.

The same caution applies if you are hanging the print in a room that is damp, newly built, or likely to be repainted often. The kit is designed for a straightforward hanging job, not for a wall that needs preparation. If you are unsure about the wall itself, the print hardware is the easy part. The harder question is whether the wall can hold the piece where you want it. That is a separate decision from what arrives in the box.

A framed print usually arrives with the minimum hardware needed to hang it. A canvas on a stretcher bar usually does not.

Product type	Typical hanging kit	Extra hardware likely needed
Framed poster print	Two hooks and wire or a fixed back hanger	Wall screw or nail
Canvas on stretcher bar	None included	Screws or a separate hanging system
Framed canvas	Two hooks and wire	Wall screw or nail

Key takeaways

Framed prints usually include a basic hanging kit, but the contents are not guaranteed.
Canvas prints on stretcher bars are designed to hang without a separate kit.
Check the product description before ordering if you want to avoid extra hardware costs.
A heavy piece or an unusual wall may need more than the supplied hardware.

Related questions

Are mounting hardware included?

For a framed print, usually yes, in the form of hooks and wire or a fixed back hanger. For an unframed canvas on stretcher bars, no, because the piece is meant to be fastened directly to the wall. The product description should state what is included.

What is the simplest way to hang a framed print?

Use the hooks and wire supplied with the frame, and fix a single screw or nail into the wall at the right height. If the frame has a fixed back hanger instead of wire, hang it on a single fixing. Either way, the hardware in the box is designed for the framed weight.

Can I hang a canvas print without buying extra hardware?

Yes, if it is on a stretcher bar and you are willing to drive screws or nails through the stretcher frame into the wall. If you want the canvas to hang from a wire or sit away from the wall, you will need a separate hanging system.

From the Auvrique collection

Made to order · Every size