Hang a large framed Hovhannes Zardaryan poster correctly
A heavy framed print needs more than a nail and hope. The right fixings, measured height, and a level line keep the frame square and the wall intact.
Use two fixings, not one, for anything over sixty centimetres wide. Measure the hanging height from the floor to the centre of the frame, then mark both hangers at the same level. A spirit level across the top edge removes the crooked look that makes a large framed poster feel wrong on the wall.
Choose fixings that match the wall
The wall decides the hardware more than the frame does. A plasterboard wall with a solid stud behind it will hold a heavy framed poster with a single wood screw. A hollow plasterboard wall needs a plug and screw rated for the weight. A masonry wall needs a masonry drill bit and a plug that matches the screw diameter. Check the weight of the framed piece before you drill. A large framed poster over a metre wide can be heavy enough to need two fixings rather than one central hook.
If you are unsure about the wall, use a stud finder or tap along the surface to locate a solid band. Mark the fixing points with a pencil before you drill. For a framed poster that you plan to keep for years, use fixings that leave a small gap between the hook and the wall so the frame sits flush without pressing against fresh plaster. A canvas edition hung the same way will behave similarly once it is stretched and framed.
Mark two points and check the level
A single central hook is simple, but two fixings give a large framed poster better stability and less tilt. Measure the distance between the two hangers on the back of the frame, then transfer that measurement to the wall. Mark the top of each fixing point, not the hook itself, so you can drill straight down. Use a tape measure from the same starting edge each time, because a small error at the start becomes a visible lean at the top.
Hold a spirit level across the two marks before you drill. A frame that is level at the top will still look straight even if the floor below it is uneven. If the marks are not level, adjust them now rather than after the frame is on the wall. For anyone working through pro tips for displaying Hovhannes Zardaryan prints, the level check is the step that separates a careful hang from a frame that slowly slips to one side.
Hanging checklist
- Weigh the framed piece before choosing fixings
- Find a stud or use a rated wall plug
- Transfer both hanger positions from the frame to the wall
- Check the marks with a spirit level before drilling
Hang the frame and settle it gently
Drill the holes slightly deeper than the plug length so the plug sits fully in the wall. Tap the plug in until it is flush, then drive the screw through the hanger or bracket until it holds with a little resistance. Place the frame onto the fixings and let it settle without forcing it. If the frame has a dust cover or backing paper, check that nothing catches on the screw head when you lower it.
Step back and look at the frame from the room rather than from directly in front. A large framed poster can look straight from close up and still sit a few degrees off from across the room. Adjust by loosening one fixing and nudging the frame, then retighten. If you are choosing between a framed poster and a canvas edition for the same wall, the same hanging method applies once the piece has a rigid back and a weight you can measure.
A large framed poster looks wrong less often because of the art than because one hanger lets the top edge drift.
| Wall type | Fixing | Notes |
|---|---|---|
| Solid stud | Wood screw | One fixing can hold a lighter frame |
| Hollow plasterboard | Plug and screw | Use a rated plug for the weight |
| Masonry | Masonry drill and plug | Match plug size to the screw |
Key takeaways
- Two fixings suit a wide framed poster better than a single central hook.
- Mark both hanger positions from the frame before you drill any hole.
- A spirit level across the top edge removes the crooked look.
- Match the fixing to the wall, not to the frame alone.
Related questions
How high should a large framed poster hang on the wall?
Measure from the floor to the centre of the frame and aim for eye level in the room where it will be viewed most often. In a living room that is usually around 140 to 160 centimetres from the floor to the centre. Adjust for ceiling height and furniture below it.
Can I hang a large framed poster on plasterboard without a stud?
Yes, if you use a wall plug and screw rated for the weight of the framed piece. Check the weight first and choose a plug that matches the screw diameter. For a heavier framed poster, two fixings spread the load better than one.
What if the frame tilts after I hang it?
Loosen one fixing, nudge the frame until the top edge reads level, then retighten. A spirit level across the top is the fastest check. If the frame keeps tilting, the fixing may be too soft for the weight or the hanger may not be sitting fully on the screw.
From the Auvrique collection
Made to order · Every sizeEvery size, every country, delivery included
Editions are made to order and shipped worldwide. Choose a format and a size, and the price you see is the price you pay.
View the collectionPart of our guide to hanging and caring for a print.



