What arrives when you order a Lucian Grigorescu print

A made-to-order print arrives protected, not pre-mounted, and the unpacking takes a few minutes of patience rather than any special skill. The real variable is the finish you chose, which sets what is in the box and what you still need to do.

Auvrique Editorial · Fine Art Editions

The short answer

A Lucian Grigorescu print arrives carefully wrapped and flat, not pre-hung. You will find the print, any backing board, and documentation inside. Framed versions arrive with the frame already assembled. Canvas versions arrive stretched or ready to hang depending on the finish selected. Expect to spend ten to fifteen minutes on placement and checking the surface for transit marks before deciding it is ready.

What is inside the box

The unboxing experience for custom art prints is straightforward once you know what to look for. A made-to-order print arrives wrapped to protect the surface, with the print itself separated from any frame or backing by padding. The box is usually the right size for the piece, which means it is not loose inside, and that is what reduces the risk of corner damage. Open it on a clear surface rather than on carpet or near an edge.

Inside you will typically find the print, a backing board or stiffener if the format calls for one, and a paper insert with the title and the finish you selected. A framed version arrives with the frame already assembled, so the glass or acrylic face is already in place and the piece is closer to being ready to hang. A canvas version may arrive stretched on bars or as a wrapped panel, depending on the finish you chose. Check the surface before you decide anything is wrong.

What changes with the finish you chose

The finish you select changes what arrives and what you still need to do. A framed poster print arrives with the frame assembled, which is the closest thing to ready to hang, though you still need to decide on hanging hardware and check that the wall can take the weight. A canvas print on bars may need a hook or a wire fitted if the maker did not include one, and that is the one step that is not always obvious from the box.

If you are weighing the difference between the two formats before you commit, the question is less about the artist and more about how much assembly you want to handle yourself. A framed poster is heavier and more complete on arrival. A canvas on bars is lighter and can be easier to position, but it may leave the hanging hardware to you. The choice between canvas and framed poster prints for Lucian Grigorescu's work is a separate decision from what happens when the box arrives.

What to check on arrival

Open the box on a clear flat surface, not on carpet.
Inspect the surface for any crease, dent or mark before removing the wrapping.
Confirm the title and the finish match what you ordered.
Check whether hanging hardware is already attached or still needs fitting.
Allow the piece to settle for a few minutes before hanging it if the room is cold.

How to handle it once it arrives

Once the box is open, the work is mostly patience. Remove the outer wrapping carefully and lay the piece flat for a moment before you decide where it goes. If it is a framed print, check the frame corners and the face for any gap or shift that may have happened in transit. If it is a canvas on bars, check that the corners of the frame are square and that the surface is not visibly slack at the edges.

Hanging is usually a separate task from unboxing. A framed piece may need two hooks or a wire, and a canvas on bars may need a single hook or a cleat depending on the weight and the wall. The shipping time for a Lucian Grigorescu print from order to delivery is a different question from what happens when it arrives, and it is worth separating the two so you do not blame the maker for a delay that belongs to the courier. When the piece arrives, the job is to inspect it and then decide where it hangs.

A print that arrives intact is not the same thing as a print that is ready to hang, and the gap between the two is usually a matter of hardware, not of damage.

Finish	What arrives	What you still do
Framed poster	Print in an assembled frame	Choose hanging hardware and check the wall
Canvas on bars	Print stretched on bars	Fit hanging hardware if not included
Wrapped panel	Print on a stiff backing	Decide on framing or hanging method

Key takeaways

A made-to-order print arrives protected and flat, not pre-mounted on the wall.
Framed versions arrive closer to ready to hang than canvas versions on bars.
Inspect the surface for transit marks before you remove the wrapping completely.
Hanging hardware is often the one thing you still need to fit yourself.

Related questions

Do I need any tools to unpack a Lucian Grigorescu print?

Usually no more than your hands and a clear surface. A framed print may need a screwdriver later if you fit your own hooks, but the unpacking itself does not require tools. Open the box carefully and keep the wrapping until you are sure the surface is undamaged.

What if the print looks creased when it arrives?

Check whether the crease is in the wrapping or in the print itself before you decide anything is wrong. A framed print should arrive with the face protected, so any mark on the image is worth reporting. A canvas on bars may have a slight ripple at the edges that settles once it hangs.

Is a Lucian Grigorescu print ready to hang straight from the box?

A framed version is close, but you still need to choose hanging hardware and check the wall. A canvas on bars may need hardware fitted first. Ready to hang usually means the piece is assembled, not that the wall is ready for it.

From the Auvrique collection

Made to order · Every size