Robert Blackburn prints arrive ready to hang with included hardware

The question sounds simple, but the answer depends on what kind of reproduction you are actually buying. Framed pieces and canvas editions travel with different kits, and the contents are not always interchangeable.

Auvrique Editorial · Fine Art Editions

The short answer

A Robert Blackburn print hanging kit is typically included when you order a framed or canvas reproduction, though the contents vary by format. A framed piece usually ships with two offset clips or a wire already fitted, while a canvas edition often arrives with pre-drilled holes and a separate set of hanging hardware. Expect four to six small parts, not a full toolkit. If you want pre-packaged tools for easy installation, confirm the format before purchase, because a poster alone will not include anything.

What arrives in the box

A framed Robert Blackburn print usually leaves the studio with the hanging hardware already attached. That means the wire is tensioned and the hooks are set, so the piece is technically ready to hang the moment it is unpacked. The box itself will still contain a small set of backup clips or screws, because a fitted wire can loosen in transit. Those spares are the closest thing to a dedicated Robert Blackburn print hanging kit in this format. They are meant to be stored, not immediately used.

A canvas edition travels differently. The image is stretched over a frame and the sides are often finished with a small gap or a wrapped edge. Hanging hardware is rarely fixed to the frame before shipping, because that would risk damage to the stretcher bars. Instead you receive separate components. Those pre-packaged tools for easy installation usually include a pair of offset clips, a wire, and sometimes two small screws. The count is small on purpose. You are not getting a full hardware pack, just enough to mount the piece once.

What is not included

Several things people assume are included actually are not. A Robert Blackburn print hanging kit does not usually contain a hammer, a level, a drill, or wall anchors. Those are the tools you bring yourself. If you are hanging the piece on drywall, you will need anchors that suit the weight of the frame and the condition of the wall. A light canvas on a single clip may need nothing more than a screw into a stud, but a heavier framed piece will not stay put with a simple nail.

The gap matters most for people who expect a turn-key result. A framed poster from Auvrique, such as the Arm of Eve framed poster, is built to arrive ready to hang, but the word ready still means you need a wall and a screwdriver. A canvas edition such as the By the Oise River canvas is similar in spirit, though the hardware arrives separately. If you want to buy the canvas edition and be sure of what you are getting, read the format description rather than assuming one kit fits all.

Typical contents by format

Framed print: fitted wire plus two backup clips or screws
Canvas edition: offset clips, wire, and sometimes two small screws
Poster alone: no hanging hardware at all
Tools you supply: screwdriver, level, wall anchors if needed

How to check before you order

The safest move is to confirm the format and the included hardware before payment, because the catalogue description is the only reliable source for what ships in the box. A framed piece and a canvas edition are close in price but different in what they require from you on the wall. If you are choosing between the two, the article on how to choose between canvas and framed poster for Robert Blackburn's work lays out the practical differences without assuming one is better.

Delivery timing is separate from hardware, but it matters to the same anxious buyer. A print that arrives quickly is still a print that needs a wall and a screw. The page on how long it takes to receive a custom Robert Blackburn print explains the lead time, which is the part people actually misjudge. Hardware is usually the smaller problem.

Ready to hang is not the same as hung. The hardware is small, and the wall is the part most people forget to plan for.

Format	Hardware included	What you still need
Framed print	Fitted wire, backup clips or screws	Screwdriver, wall anchor if needed
Canvas edition	Offset clips, wire, sometimes screws	Screwdriver, level, anchors for heavier pieces
Poster alone	None	Separate frame or mounting hardware

What changes by format

Key takeaways

A framed Robert Blackburn print usually ships with the wire already fitted and a small set of backup clips.
A canvas edition typically includes separate hanging hardware, not a fixed wire.
A poster alone includes no hanging hardware at all.
You still need a screwdriver, a level, and suitable wall anchors for the weight of the piece.

Related questions

Does every Robert Blackburn reproduction include hanging hardware?

No. A framed print and a canvas edition usually include hardware, but the contents differ. A poster sold on its own does not include any hanging kit. Confirm the format in the product description before assuming hardware is included.

Can I hang a Robert Blackburn print without a drill?

Sometimes. A light canvas on a single clip may go into a stud with a screw and a screwdriver alone. A heavier framed piece on drywall usually needs anchors, which means a drill is the safer tool. The wall type matters more than the print itself.

What do I do if the hardware in the box is missing?

Check the packing slip and the box contents before discarding anything. If a small clip or screw is genuinely missing, contact the seller using the Auvrique contact page and describe the format you ordered. Hardware is small enough that it can be overlooked in packing.

From the Auvrique collection

Made to order · Every size