Emily Carr prints ship with hanging hardware included

Most reproduction prints arrive ready to mount, but the exact hardware depends on the format you choose. Framed editions differ from canvas wraps, and the small print details matter more than the label on the box.

Auvrique Editorial · Fine Art Editions

The short answer

Yes, Emily Carr prints generally arrive with hanging hardware included, though the exact kit depends on the format. A framed poster typically ships with a wire and two D-rings fixed to the frame back. A canvas print usually arrives with pre-attached hanging strips or a stretcher bar fitted for a nail or hook. The package should state what is included before you open it.

What the hardware looks like by format

A framed poster is the simplest case. The frame comes with a hanging wire stretched across the back and secured at two points, usually with D-rings or screw eyes. That setup works on a single nail or a hook rated for the weight of the frame. You do not need extra tools beyond a tape measure and a level. The wire is already tensioned, so the frame sits level once you drive the nail at the right height.

A canvas print works differently. The image wraps around a wooden stretcher bar, and the hanging method depends on how the bar was finished. Some bars have a built-in groove that sits on a nail or a screw head. Others use a keyhole slot or two adhesive hanging strips on the back. The package should name the method, because a nail-only system and a strip system are not interchangeable. If the listing is vague, ask before you order.

How to check before the box arrives

The product description is the first place to look. A clear listing names the hanging method in the item details, not just in marketing copy. Look for a phrase like hanging hardware included or ready-to-hang features, and read what it actually refers to. A framed poster and a canvas print are not the same object, and the hardware they need is not the same either.

If the description is thin, the next step is a direct question to the seller. Ask what is attached to the back and what wall fastener it expects. A framed piece should state the wire and the fasteners. A canvas should state whether it is nail-ready or strip-ready. That answer matters more than any general promise, because the wrong fastener can damage the wall or leave the piece crooked on the first try.

Hardware by print format

Framed poster: hanging wire with D-rings or screw eyes fixed to the frame back
Canvas print: stretcher bar with a nail groove, keyhole slot, or adhesive hanging strips
Check the listing for the exact method before you order
Ask the seller if the description names only ready-to-hang features without details

What to do when the kit is missing

A missing or incomplete hanging kit is a real frustration, and it is the kind of problem that turns a straightforward purchase into a hardware store trip. If the package arrives without the hardware described, open the box and check the contents before you assume the worst. Sometimes the hardware is tucked into a separate compartment or listed under a different item name. If it is genuinely missing, contact the seller with the order number and a photo of what arrived.

The fix is usually straightforward. A framed poster needs a replacement wire and two D-rings or screw eyes, both of which are common hardware. A canvas print with a nail groove needs only a suitable nail or screw, while a strip-based canvas needs new adhesive strips rated for the weight. The point is to match the replacement to the original method rather than improvising a different one. That keeps the wall and the print in the condition they were in before the mistake.

The right hanging kit is not a luxury. It is the difference between a print on the wall and a print still in the box.

Format	Typical hardware	Wall fastener needed
Framed poster	Hanging wire with D-rings or screw eyes	Single nail or hook
Canvas print	Stretcher bar groove, keyhole, or adhesive strips	Nail, screw, or strip backing
Unframed poster	Not usually supplied with hardware	Separate framing or mounting needed

Hanging hardware by format

Key takeaways

Most Emily Carr reproduction prints ship with some form of hanging hardware, but the exact kit depends on the format.
A framed poster usually includes a wire and D-rings fixed to the frame back.
A canvas print usually uses a stretcher bar groove, a keyhole slot, or adhesive hanging strips.
Check the product description for the specific method before you order, and ask the seller if it is vague.

Related questions

Does a framed Emily Carr poster always include a wire?

Most framed posters include a hanging wire fixed to the back with D-rings or screw eyes. The wire is usually tensioned before shipping, so the frame hangs level once you drive a nail at the right height. If a listing does not mention the wire specifically, treat that as a gap to clarify before you buy.

Can I hang a canvas print with a single nail?

Only if the stretcher bar was made for it. Some canvas bars have a groove that rests on a nail or a screw head, and that setup works with a single fastener. Others use adhesive strips or a keyhole slot, which need a different approach. The back of the bar tells you which method applies.

What if the hanging hardware is not in the box?

Open the package and check every compartment before you assume it is missing. If it is genuinely absent, contact the seller with the order number and a photo of the contents. For a framed poster, a replacement wire and D-rings are easy to source. For a canvas, match the replacement to the original hanging method rather than improvising a different one.

From the Auvrique collection

Made to order · Every size