Hanging an Alexandre Istrati Print Without the Fuss

The short answer is yes, but the details decide whether it stays that way. Here is what arrives in the box, what is already fitted, and what you still need to do yourself.

Auvrique Editorial · Fine Art Editions

The short answer

Yes. Alexandre Istrati prints from Auvrique arrive ready to hang. Framed editions ship with pre-installed hardware for easy display, including the hanging wire or sawtooth bracket fitted to the back. Canvas editions on a stretcher bar need a single nail or hook in the wall. Nothing else is required.

What arrives in the box

A framed Istrati print comes out of its packaging complete. The frame is assembled, the print is mounted inside it, and the hanging hardware is already fixed to the rear rail. You supply the nail or hook and a wall. That is the entire task. Most people finish in under five minutes, and the only tool involved is a hammer or a drill, depending on the wall.

Canvas editions work differently. The print is stretched over a wooden frame, so the canvas itself is the structure. There is no outer frame and no fitted wire, which means you choose your hanging method. A standard picture hook holds smaller sizes. Larger canvases benefit from two hooks set apart, which keeps the top edge level over time. If you prefer the look of a border, a framed poster edition such as a framed poster edition includes that hardware from the start.

Getting it level the first time

The honest caveat is that ready to hang does not mean level by itself. A single hook lets a canvas tilt if it is nudged, and a wire can sit slightly off centre if the bracket was fitted by hand. Two fixes solve almost every case. Use two hooks rather than one, spaced to match the width of the piece. Or add a small adhesive putty pad at each lower corner to lock the frame against the wall.

Weight matters more than hardware. A medium canvas is light enough for a standard hook in plasterboard. A large framed print carries more mass, so find a stud or use an appropriate wall anchor. If you are still deciding on scale, the sizing guide for choosing the right print size for your wall covers how dimensions and weight change together, and the unboxing notes for what is included with each edition list the fittings supplied.

Before you hang it

Check that the hanging wire or bracket is tight before lifting the piece
Use two hooks for anything wider than about 60 centimetres
Match the wall anchor to the wall type, not to the print
Step back and sight the top edge against a door frame before finalising

If something arrives wrong

Occasionally a bracket loosens in transit or a frame arrives with the wire displaced. This is a packing problem, not a hanging problem, and it is worth checking before you put a nail in the wall. Turn the piece face down on a clean surface, test the fittings by hand, and tighten anything that moves. Two minutes of checking prevents a fall later.

If a component is genuinely faulty, the piece can be returned rather than repaired at your expense. The terms are set out in the refund policy for damaged or faulty editions, and delivery timing for a replacement is covered in the guide to how long a print takes to arrive. The point of pre-installed hardware is that you never need to source fittings yourself, and a replacement honours that.

Ready to hang describes the box, not the wall. The nail is still your job.

Format	Hardware fitted	Your part
Framed print	Wire or sawtooth bracket pre-installed	One nail or hook in the wall
Canvas on stretcher	None, hangs on the stretcher bar	Hook or two hooks, chosen by size
Framed poster	Bracket pre-installed	Single hook, light anchor usually enough

What each format includes

Key takeaways

Framed Istrati editions ship with the hanging hardware already fitted to the back of the frame.
Canvas editions hang directly on the stretcher bar and need only a hook or two in the wall.
Two hooks spaced apart keep wider pieces level far better than a single central fixing.
Check the fittings by hand after unboxing, and return the piece if anything arrived loose or faulty.

Related questions

Do I need to buy separate hooks or wire for a framed print?

No. The wire or bracket is fitted before the print is packed, so the hardware comes with the piece. You only need something to fix into the wall, such as a picture hook, a nail, or a wall anchor for heavier frames. Nothing needs to be screwed into the print itself.

Can a canvas print hang without a frame at all?

Yes. A canvas stretched on wooden bars is self supporting and hangs straight on a hook. Many people prefer this clean edge look. If you are weighing the two, the comparison of [[A3|framed and unframed canvas options]] sets out how each one hangs and where each suits a room.

What if my wall is plasterboard or brick?

The print does not change, the fixing does. Plasterboard usually takes a self drilling anchor for anything beyond a small canvas. Brick or concrete needs a masonry plug and a drill. The hanging kit on the print stays the same in every case, so plan the wall fixing before the piece arrives.

From the Auvrique collection

Made to order · Every size