Sevastre prints arrive with hanging hardware inside the box

The short answer is yes for most editions, but the kit varies by format and wall type. Here is what ships, what it leaves out, and where a missing screw will cost you time.

Auvrique Editorial · Fine Art Editions

The short answer

Most Sevastre reproductions ship with a hanging kit included, usually two hooks and matching screws sized to the frame depth. You still need a drill or a wall anchor if you are mounting into plaster or drywall alone. The kit does not include a level, a pencil, or extra fixings for heavy canvas editions. Plan for one extra trip to the hardware store if your walls are not solid wood.

What is actually in the package

A framed Sevastre poster typically ships with two metal hooks, two short screws, and a small cardboard sleeve holding them together. That is enough for a solid timber wall or a brick surface you can bite into. The kit does not include wall anchors, so a hollow drywall installation needs separate fixings bought on the spot. Canvas editions are lighter but wider, and the included hardware is often a single hanging strip rather than two hooks. Check the format before you assume the same kit applies across the range.

The packaging itself is built to survive transit, not to double as a storage box. Remove the print from its sleeve before you measure the wall, because the sleeve adds a centimetre or two that throws off your spacing. Lay the hardware out on a table and match each screw to its hook before you start drilling. A five minute check here prevents the common mistake of driving the wrong screw into the wrong hole and stripping the thread.

What you still need to supply

The question of extra tools comes down to your wall, not the print. A solid masonry wall needs a masonry bit and a plug the size of your screw. A hollow wall needs a plastic anchor rated for the weight of the framed piece, which for a large Sevastre poster can be several kilograms. A simple picture hook on a timber stud is the easiest route and needs only the included screw. If you cannot find a stud, plan for an anchor and a drill bit you do not yet own.

You also need a tape measure, a pencil, and a level if the room matters to you. The included hardware will hold the print, but it will not centre it or straighten it. A cheap bubble level removes the guesswork on a long wall. If you are renting, check whether the landlord accepts small holes before you commit to anchors that leave a larger mark. The print itself is not the expensive part of the mistake.

Hardware checklist

Two hooks and two screws are usually included for framed posters
Wall anchors are not included and must match your wall type
A drill with the correct bit is required for masonry or hollow walls
A tape measure and a level are not in the box and are worth buying

Assembly steps that avoid rework

Measure the height of the wall space first, then mark the top edge of the print before you touch the hardware. That single mark controls everything else and keeps you from drilling a row of holes at different heights. For a two hook system, measure the distance between the hooks on the back of the frame and transfer that exactly to the wall. A mirror error here is the most common reason a print comes down a second time.

Drive the screws through the hooks into the wall at the marked points, leaving enough thread exposed to catch the frame. Hang the print, then step back and check the level before you tighten anything fully. Once it sits straight, give each hook a firm tug to confirm the wall holding it. If one side drops, the anchor or the stud is wrong, and the fix is a new hole, not more force on the same one.

The kit holds the print. It does not hold the wall, and that distinction is where the frustration starts.

Key takeaways

Most Sevastre reproductions include a basic hanging kit with hooks and screws.
Wall anchors and a drill are not included and depend on your wall type.
Canvas editions may ship with a single hanging strip rather than two hooks.
Measure the wall before drilling and check the level before tightening fully.

Related questions

What size screws work with the included hooks

The screws supplied are short and matched to the hook thread, usually around one centimetre of thread engagement. They bite into timber or brick but do not suit a hollow wall on their own. Use a longer screw only if your anchor requires it, and keep the head flush with the hook rather than burying it.

Can I hang a Sevastre canvas without a drill

A light canvas on a single hanging strip can sometimes use a heavy adhesive hook, but the result is less secure and less level. A framed poster is heavier and generally needs a drilled fixings point. If you cannot drill, ask whether the edition you are considering is light enough for a rated adhesive system.

What if the holes in the frame do not line up with my marks

Measure the distance between the hanging points on the frame itself, not the width of the print face. Transfer that measurement to the wall from a single top reference mark. If the frame holes are uneven, the frame is the problem, not your marks, and forcing it straight will crack the joint.

From the Auvrique collection

Made to order · Every size