Clean a framed poster of Alla Horska with soft cloths and dry methods

The safest routine avoids liquid near the glass and starts with the frame, not the print. Horska works on paper need the same restraint as any framed print, and the glass does most of the work.

Auvrique Editorial · Fine Art Editions

The short answer

Use a dry, lint free cloth on the frame first, then a barely damp cloth on the glass, never on the print itself. Keep moisture under one percent of the surface and wipe in a single direction. For cleaning framed poster tips that last, dust monthly and deep clean the glass only once or twice a year.

Start with the frame, not the image

The frame takes the dust and the fingerprints, so it should be cleaned first and separately from the print. A soft dry cloth removes most surface grit without scratching the finish, and that matters because a gritty cloth dragged across glass leaves marks you will see later. Work top to bottom so debris falls away from the area you have already cleared. If the frame has a wood or metal finish, test any cleaner on a hidden corner before you commit. The goal is to remove what sits on top, not to restore the finish to a showroom state.

A framed poster of Horska sits behind glass for a reason, and that glass is the layer you actually want clean. Paper prints fade and absorb moisture far faster than the frame does, so the print itself should rarely see a cloth at all. If dust has settled on the surface of the print through a gap in the framing, stop and check the seal before you reach for anything wet. A loose backing or a cracked corner is the point where a simple cleaning turns into a repair question.

The glass and the print behind it

Clean the glass with a cloth that is barely damp, not wet, and wring it out until it feels almost dry in your hand. Spray the cloth, not the frame, because liquid running down into the join between glass and frame is how moisture reaches the print. A single direction wipe is enough for most fingerprints and smudges, and a second pass usually means you are using too much liquid. For how to preserve framed art prints over years, the glass matters more than the cloth because it keeps the paper away from the room.

If the print itself needs attention, that is usually a sign the framing has let something in that should have stayed out. Horska worked in paint and on paper, and a reproduction on paper behaves like any other paper print once it leaves the studio. Do not lift the glass to wipe the surface unless you are prepared to reseal the piece properly afterward. check the print quality before framing if you are unsure whether the surface you are looking at is the print or a mark on the glass.

What to avoid

Do not spray cleaner directly onto the frame or glass.
Do not use paper towels, which leave lint and micro scratches.
Do not clean the print surface with any liquid unless a conservator has checked the framing.
Do not place the piece where direct sun or a heater will reach it.

Where to hang it and how often to check

The room decides how often you will need to clean the piece, and that is the part most care guides leave out. A framed poster near a window, a kitchen, or a radiator will collect grime and face temperature swings that a print in a quiet interior does not. Dust monthly with a dry cloth and inspect the corners for looseness at the same time, because a loose corner is easier to fix early than after the backing has shifted. If the room is dry and out of direct light, twice a year is usually enough for the glass.

Horska's work tends to read best when it is not competing with bright light or heavy traffic, and that same restraint protects the print as much as it protects the look of the room. find the right size for a small room before you hang it, because a piece that fits the wall is easier to keep clean than one you keep moving to make space. buy the framed poster edition if you want a print already behind glass rather than building the framing yourself.

The print should almost never be cleaned directly. The glass and the room do most of the work.

Location	Dusting	Glass cleaning
Quiet interior, no direct light	Monthly	Once or twice a year
Near a window or bright room	Every two weeks	Every six months
Kitchen or high traffic area	Weekly	Every three to four months

Cleaning frequency by location

Key takeaways

Clean the frame first with a dry lint free cloth before touching the glass.
Wipe the glass with a barely damp cloth, never spray liquid onto the frame.
Do not clean the print surface itself unless the framing has been checked by a professional.
Dust monthly and adjust the schedule up if the room is bright, humid, or busy.

Related questions

Can I use glass cleaner on the framed poster?

Use a glass cleaner only on the cloth, not sprayed onto the frame, and only on the glass itself. Ammonia based cleaners can leave a residue on some frame finishes and can seep into the join if you spray too heavily. A cloth dampened with water is usually enough for routine marks.

What if there is dust on the print behind the glass?

If dust is visible on the print surface, the framing seal is likely loose enough to let particles in. Do not open the frame yourself unless you can reseal it properly afterward. A loose backing is also the point where moisture and pests become a real risk to the paper.

How do I keep the print from fading over time?

Keep the piece out of direct sun and away from heat sources, and use glass that blocks ultraviolet light if you can. Paper prints fade fastest where light and heat are strongest, so the wall you choose matters as much as the cleaning routine. A quiet interior wall is usually the safest choice.

From the Auvrique collection

Made to order · Every size