What Ships in the Box With a Framed Print

Hanging hardware is the difference between a print on the wall in ten minutes and a second trip to the hardware shop. Here is what each format typically includes, and what to check before ordering.

Auvrique Editorial · Fine Art Editions

The short answer

Framed posters and canvas prints from most edition sellers, Auvrique included, arrive with the hardware needed to hang them. A framed poster typically includes a hanging kit suited to its weight, while a canvas usually comes with a wire or bracket already fitted. Always confirm on the individual product page, since inclusion varies by format and size.

What a hanging kit usually contains

A hanging kit is a small set of parts that lets a print go straight onto the wall. For a framed poster it is usually a hook or two, matching nails, and sometimes a level strip or adhesive pad. For a canvas it is often simpler, because the stretcher bars give the piece its own rigid structure and the fitting is attached before it ships.

The point of the kit is convenience. You should not need to buy anything else, and you should not need special tools beyond a hammer or a drill depending on your wall. Anyone ordering a framed poster, such as the Dock End Whitby Harbour framed poster, can expect the fixings to arrive in the same box as the print itself. If a listing is silent on this, ask before buying rather than assuming.

How the two formats differ in practice

Framed posters and canvases hang differently, and the hardware reflects that. A frame is a rigid rectangle with a fixed hanging point, so the kit is built around precise placement on the wall. A canvas is lighter per size and often hung from a wire across the back, which makes small adjustments easy after it is up. Neither approach is better. They suit different walls and different tolerances for a crooked picture.

Weight matters more than format. A large canvas can weigh more than a small frame, so check the listed weight and match your wall anchor to it. Plaster and brick need different fixings from drywall, and no kit can cover every wall type. The hardware gets the print onto the wall. Making that wall ready is the part the buyer owns. If you are still weighing the two formats against each other, the comparison of canvas prints and framed posters sets out the tradeoffs plainly.

Check before you order

Confirm the product page states that a hanging kit or fitted hardware is included.
Check the listed weight of the print against the type of wall you plan to use.
Decide whether you want a fixed hanging point or a wire that allows adjustment.
Keep the packaging until the print is up, in case a fitting needs replacing.

Hanging a print without the guesswork

Easy installation for wall art is mostly preparation. Hold the print at eye level, mark the top edge lightly in pencil, and fix the hardware to that mark before lifting the piece. For a frame with two hanging points, measure the distance between them and transfer both marks to the wall. Ten minutes of measuring prevents the familiar pattern of extra holes.

One honest caveat. Kits are designed for ordinary walls in ordinary conditions, and a very large piece in a high traffic area or above a radiator deserves a stronger anchor than the supplied nails. If a print is a gift or part of a planned arrangement, as with a gallery wall of several framed pieces, hang the largest first and work outward. Size planning for a Kepes print follows the same logic as for any artist.

The hardware is the easy part. The wall decides everything else.

Format	Hardware included	Installation effort
Framed poster	Hooks and nails sized to the frame	Low, fixed hanging point
Canvas print	Wire or bracket fitted to the stretcher	Low, allows adjustment
Large formats	Kit plus a wall anchor you supply	Moderate, check the weight

Typical hanging hardware by format

Key takeaways

Framed posters and canvas prints normally arrive with the hardware needed to hang them.
A canvas is usually fitted with a wire or bracket before it ships, so no separate kit is needed.
The supplied kit suits ordinary walls, but heavy or large pieces may need a stronger anchor.
Always confirm what is included on the individual product page before ordering.

Related questions

Do I need to buy nails or hooks separately for a framed poster?

Usually not. A framed poster edition normally ships with a hanging kit matched to the weight of the frame, so the fixings arrive in the same box. The exception is an unusual wall. Plaster, brick and tile all need anchors the kit will not contain, so buy those for your wall type before the print arrives.

Is a canvas easier to hang than a framed print?

Often, yes. A canvas has a rigid internal frame and usually a wire or bracket already attached, so it sits on a single hook and can be leveled by hand after hanging. A framed poster has a fixed hanging point, which is more precise but less forgiving. Both are straightforward jobs for one person at moderate sizes.

Can I hang a large canvas on a plaster wall with the supplied kit?

Be cautious. Plaster holds supplied nails poorly at higher weights, and a failing anchor damages both the wall and the print. For anything large, use a plaster anchor or fix into a stud behind the wall. The kit covers the common case. Your wall, not the print, determines whether that case applies.

From the Auvrique collection

Made to order · Every size