What Comes in the Box With a Framed Poster
A framed poster usually arrives ready to hang, but the kit contents vary by seller and frame size. Here is what to expect, what you may still need, and how to hang it without a second trip to the hardware store.
Yes, in most cases. Framed poster editions typically ship with a basic hanging kit in the box, usually a hook, a nail or screw, and an anchor or two. Larger frames, above roughly 60 x 80 cm, often need a sturdier wall plug or a second fixing point that you supply yourself.
What the hanging kit usually contains
A framed poster is the lightest category of wall art, and sellers know the buyer wants it on the wall within minutes of opening the box. The standard kit is modest. Expect one or two hooks, matching nails or screws, and sometimes a small spirit level or a printed template. The frame itself usually has a hanging wire or a sawtooth bar already fitted, so the kit is the wall side of the equation, not the frame side.
Weight is the variable that decides whether the included kit is enough. A framed poster behind glass or acrylic rarely exceeds three or four kilograms even at larger sizes, which is within reach of a single hook in most plaster or drywall. If you are weighing a framed poster against a heavier alternative, the comparison in choosing a canvas print or framed poster covers how much the format changes the mounting job.
When you need to buy extra hardware
The honest answer is that a kit covers a best case. A hook hammered into plaster holds a light frame fine. It holds nothing on tile, brick or concrete, and it holds less on older lath walls. If your wall is any of those, plan on buying wall plugs and masonry bits before the print arrives, not after. That single purchase is what separates a five minute job from a stalled one.
Very large frames are the other exception. Above roughly 70 x 100 cm, most framers recommend two fixing points rather than one, both for weight distribution and to keep the frame level over time. A kit built for a single hook will not cover that. Anyone hanging a large edition, whether a framed piece or something from the canvas range like Art Forms in Nature on canvas, should assume the included hardware is a starting point.
Check before you hang
- Confirm the wall material, because plaster, drywall, brick and tile each need different fixings.
- Weigh the framed piece if the listing does not state it, since kits are rated for a load range.
- Use two fixing points on frames larger than about 70 x 100 cm.
- Keep the frame out of direct sun and away from radiators to protect the print itself.
Hanging it well in five minutes
Mark the spot at eye level, which for most rooms puts the centre of the frame around 145 to 155 cm from the floor. Hold the frame against the wall before committing, because a print that reads well in a listing can sit awkwardly above a sofa or a sideboard. Bryen's work, with its dense abstract surfaces, tends to want wall space around it rather than a crowded arrangement, a point the themes in Bryen's paintings piece touches on.
Then it is mechanical. Fix the hook, hang the frame, check it with a level, and adjust. If the piece arrives damaged or the kit is missing, the sensible sellers cover it, and the terms are worth reading before you buy rather than after. The same logic applies to any framed edition you might buy a framed poster of, from Bryen to anyone else in the catalogue.
The hanging kit is rarely the problem. The wall is.
| Frame size | Usually included | You may still need |
|---|---|---|
| Up to 50 x 70 cm | One hook, nail, small anchor | Nothing in most walls |
| 50 x 70 to 70 x 100 cm | Two hooks, screws, anchors | Wall plugs for masonry |
| Above 70 x 100 cm | Two hooks, screws | Sturdier anchors, a second pair of hands |
Typical kit contents by frame size
Key takeaways
- A framed poster normally ships with a basic hanging kit covering hooks, nails and anchors.
- The kit assumes plaster or drywall, so masonry and tile walls need extra fixings bought separately.
- Frames larger than about 70 x 100 cm should hang from two points regardless of what the kit contains.
- Eye level, roughly 145 to 155 cm to the centre of the frame, is the default height for a single piece.
Related questions
Do I need to buy extra hardware for a Bryen print?
Only if your wall is difficult. On standard plaster or drywall, the included kit should be sufficient for a framed poster, which is a light piece. Brick, concrete and tile need masonry fixings the kit will not include. Very large frames benefit from a second fixing point for level and stability over time.
Can I hang a framed poster without drilling?
Yes, within limits. Adhesive hooks rated for two to three kilograms will hold most framed posters on smooth painted walls, though they can fail on textured surfaces and in humid rooms. For anything larger than about 60 x 80 cm, or on plaster that flakes, a proper fixing into the wall is the safer route.
What should I do if the hanging kit is missing from the box?
Contact the seller before buying replacements, since a missing kit usually counts as an incomplete delivery and should be resolved at no cost to you. The hardware itself costs little, but the point is that a complete order should arrive complete. Keep the packaging until the issue is settled in case a replacement frame is needed.
From the Auvrique collection
Made to order · Every sizeEvery size, every country, delivery included
Editions are made to order and shipped worldwide. Choose a format and a size, and the price you see is the price you pay.
View the collectionPart of our guide to hanging and caring for a print.



