Hanging hardware arrives with most art prints

The short answer is yes for most ready-made reproductions, but the details vary by format and by seller. Here is what to check before you assume the hardware is included.

Auvrique Editorial · Fine Art Editions

The short answer

Most ready-to-hang reproductions include a basic hanging kit. That usually means two wall hooks, two screws and a pair of hanging strips or wire. The kit is designed for a single standard installation and is not suited to heavy canvas or large framed pieces. Check the product listing before you buy, because some sellers ship the print only.

What a basic hanging kit contains

A typical kit is small and unremarkable. It usually holds two metal hooks, a short length of wire or two adhesive strips, and the screws needed for the hooks. That is enough for a light poster or a framed sheet under a certain weight. The hardware is generic rather than matched to the print, so the installer still needs to judge the wall and the load. Auvrique framed poster editions follow this pattern, with the hardware packed separately inside the box. see the framed poster edition

Canvas editions are different. A stretched canvas is heavier and is usually fitted with a cleat or a set of offset clips rather than a simple hook. Those fittings are often attached to the frame before shipping, but the wall hardware may still be left to the buyer. If you want a print that arrives fully installed on the wall, confirm the format and the weight before you order. view the canvas edition

When the hardware is not included

Some sellers ship the print only and leave the hanging to you. That is more common with larger formats, with canvas, and with limited runs that are packaged for storage rather than for immediate display. The omission is not a defect. It is a packaging choice, and it is usually stated in the product details if you look for it. The practical issue is that you then need to buy hardware separately, which adds cost and a trip to a shop. check available sizes for framed prints

A second gap appears when the print is heavy enough to need a different fixing. A kit designed for a 2 kg poster will not hold a 10 kg canvas. In that case the right answer is a wall anchor or a cleat matched to the weight, not a substitute from the original kit. The buyer who wants convenience should treat the included kit as a starting point and verify the load before hanging anything. read about hanging without wall damage

Check before you buy

Read the product listing for the words hanging kit or hardware included
Check the weight of the print and match it to the fixing you have
Decide whether you need a cleat for a heavy canvas
Keep the packaging until the print is on the wall

How to hang it without a separate trip

If the kit is included, start with the wall rather than the print. Mark the height, use a level, and test the fixing in a hidden spot if the wall surface is unusual. Most included kits assume a solid interior wall and a light to medium load. They are less reliable on plaster that is old, on tile, or on a wall that has been repainted several times. A small check now avoids a fall later. see shipping options for a framed poster

If the kit is not included, buy hardware that matches the print weight and the wall type. A hook rated for the load is the minimum. For a canvas, a cleat or a set of wall anchors is usually the safer choice. The goal is simple: the print stays level and stays up, and you do not need to revisit the wall in a month. find the most affordable high-quality print

The included kit is a convenience, not a guarantee. Match the hardware to the weight and the wall, or the print will not stay where you put it.

Format	Typical hardware	Watch for
Framed poster	Hooks, screws, wire or strips	Weight limit on the kit
Canvas	Cleat or clips on the frame	Wall hardware may be separate
Poster only	Nothing	Buy hardware separately

What is usually included by format

Key takeaways

Most ready-to-hang reproductions include a basic hanging kit.
Canvas editions often need separate wall hardware.
Check the product listing before you assume the hardware is included.
Match the fixing to the weight of the print and the wall type.

Related questions

Does a hanging kit work for every wall type?

No. Most kits assume a solid interior wall and a light to medium load. Old plaster, tile and heavily repainted surfaces need different fixings. Test the wall first if you are unsure.

Can I hang a canvas with the same kit as a poster?

Usually not. A canvas is heavier and often needs a cleat or wall anchors rated for the load. A poster kit is designed for a much lighter sheet and is not a safe substitute.

What if the listing says nothing about hardware?

Assume the print may ship without it. Check the product details or contact the seller before you buy. Buying hardware separately is straightforward, but it adds cost and time.

From the Auvrique collection

Made to order · Every size