Framed prints arrive with hanging hardware included

The short answer is yes, but the kit is basic and the frame itself does the real work. Know what is in the box before you drill anything into the wall.

Auvrique Editorial · Fine Art Editions

The short answer

A framed print typically ships with two D-rings, a short length of picture wire and two wall hooks or nails. That is enough for a single nail or screw in most walls. The hardware is not a full kit for masonry or heavy frames, and it is not always listed item by item on the product page.

What the standard kit contains

A framed print arrives with the simplest hardware that will hold it safely on a normal interior wall. Two D-rings screwed into the frame sides are the norm, with picture wire strung between them. One or two small hooks or nails usually come with the set. That combination suits drywall, plaster and most timber studs at domestic weights.

The kit is not designed for masonry, brick or concrete. It is also not a substitute for a proper fix on a very large or unusually heavy frame. If the print is substantial, a single nail in plaster is not enough and the wire will deflect. Treat the included hardware as a starting point, not as a universal solution.

When the standard kit is not enough

Some walls need more than the basic kit. Masonry, brick and concrete require a proper drill and a masonry bit, plus a screw or anchor that matches the wall. A framed print on a stone wall will not hold on a nail alone, regardless of how tidy the wire looks. The included hardware still works as the attachment point on the frame itself.

Weight changes the calculation too. A small framed print is light enough for a single hook in a solid wall. A larger frame or one with a heavier moulding needs two fixings and a stiffer wire. If you are unsure of the wall type, test a small area first or use a fix that suits the surface rather than the frame.

What to check before hanging

Confirm the wall type before choosing a fixing
Weigh the framed print or estimate it against the hook rating
Use two fixings for anything over a modest weight
Keep the wire centred so the frame hangs level

What is not included and what to do

The kit does not include a drill, a screwdriver, a level or wall anchors for masonry. Those are separate purchases if your wall needs them. It also does not include a pre-drilled hole in the frame itself, which is a different question from whether hardware is included. A framed print can be hung with the wire system even when the wall itself needs a proper fix.

If the frame is large or the wall is uncertain, buy the right anchor before you start. A framed print of Ethel Léontine Gabain's work does not need special hardware beyond what any framed print needs, but the artist's name does not change the physics of the wall. The ready-to-hang convenience is real for ordinary interiors and less useful on a stone wall.

The hardware in the box is enough for a normal wall. It is not a promise for every wall.

Wall type	Fixing needed	Included hardware enough
Drywall or plaster	Single nail or hook	Usually yes
Timber stud	Screw into stud	Usually yes
Masonry or brick	Drill and anchor	No, only the frame attachment

Key takeaways

A framed print usually ships with D-rings, picture wire and one or two hooks or nails.
That hardware suits drywall, plaster and timber studs at domestic weights.
Masonry, brick and concrete need a drill and anchor beyond the included kit.
The frame attachment is standard; the wall fixing is the part you choose.

Related questions

Does the kit include a drill or wall anchors?

No. The included hardware is the attachment for the frame, not the tools or anchors for the wall. A drill, screwdriver, level and masonry anchors are separate if your wall needs them. For a normal interior wall, the kit is usually enough on its own.

Can I hang the print on a single nail?

Yes, for a light framed print on a solid wall. A single nail or hook works when the frame is modest in weight and the wall holds it. Heavier frames need two fixings and a stiffer wire so the picture does not swing or tilt.

What if my wall is masonry or brick?

The included hardware still attaches to the frame, but it will not hold in masonry on its own. Drill a hole, use a masonry bit and fit an anchor or screw that suits the wall. The wire and D-rings then do the same job they do on any other wall.

From the Auvrique collection

Made to order · Every size