What a Jock Macdonald Print Hanging Kit Actually Includes

Whether mounting hardware arrives in the box depends on the format and the seller. Here is what is standard, what is not, and where the hidden costs usually hide.

Auvrique Editorial · Fine Art Editions

The short answer

Auvrique does not currently offer Jock Macdonald editions, so no hanging kit applies to a purchase here. Generally, framed prints from most reproduction sellers include basic mounting hardware, often a wire or D-rings, while unframed canvas prints usually ship without any. Check the listing line that says what is included before paying.

The Short Answer on Included Hardware

Most reproduction sellers include some form of hanging hardware with framed prints. The typical kit is modest. Two D-rings, a length of wire or cord, and occasionally a small hook or two for the wall. That is enough for a print up to roughly 60 cm across on a standard drywall or plaster wall. Anything larger, or anything hung on brick or tile, needs anchors and a drill that no kit in the box will cover.

Canvas prints are the exception. Stretched canvas is often sold without hardware because many people frame it, lean it on a ledge, or fit their own strainer bars. If a listing does not state that hardware is included, assume it is not. The cost of a basic kit from a hardware store is small, usually under ten dollars or euros, so the risk is inconvenience rather than expense.

Where Buyers Get Caught on Cost

The real cost is not the kit. It is the assumption. A buyer orders a framed piece, waits two weeks, unwraps it, and discovers the wall hooks are a separate purchase. For a medium price purchase that annoyance is enough to sour the whole transaction, which is why the included accessories line deserves the same attention as the price line.

Three things are worth confirming before any order. Whether hardware is listed as included, whether the hardware suits the wall type, and whether the frame arrives ready to hang or needs assembly. A framed poster that arrives with a loose back panel and a bag of clips is a different job from one that arrives wired and finished. The unboxing details for a typical framed poster what a framed poster looks like unboxed make this difference concrete.

None of this changes between artists. A Jock Macdonald print hanging kit, if one is offered, works the same way as hardware for any comparable framed edition. The format decides the fittings, not the picture.

Hanging a Print Without a Kit

A kit is a convenience, not a requirement. A single nail holds a small framed poster on drywall. Two picture hooks spaced to match the D-rings hold a medium frame more securely and keep it level. For stretched canvas without a frame, a French cleat cut from a strip of timber costs little and carries far more weight than wire.

Match the fixing to the wall and the rest follows. Plaster takes a standard hook. Brick needs a plug and screw. Tile needs a carbide drill bit and a steady hand. Ten minutes of preparation prevents the one outcome everyone dreads, which is a frame on the floor and a hole in the wrong place. If the choice between formats is still open, the tradeoffs are set out in choosing between canvas and framed poster.

The hardware is never the expensive part. Assuming it exists is.

Format	Hardware usually included	What you may still need
Framed poster	D-rings, wire or cord	Wall hooks for heavy frames
Stretched canvas	Often none	Cleat, sawtooth hanger or frame
Unframed print	None	Frame, mounts and fittings

Typical hardware by format

Key takeaways

Framed prints from most sellers include basic hardware, canvas prints often do not.
A replacement kit costs under ten units of currency at any hardware store.
Wall type matters more than the kit, since brick and tile need anchors and a drill.
Confirm the included accessories line on any listing before ordering.

Related questions

Do canvas prints come with mounting hardware?

Usually not. Stretched canvas is frequently hung unframed, leaned on a ledge, or fitted by the buyer, so many sellers ship it bare. A sawtooth hanger or a timber cleat solves it cheaply. If hardware matters to you, framed formats are the safer bet, and the format comparison is worth reading first.

What hardware do I need for a heavy framed print?

Anything wider than about 60 cm or heavier than a few kilograms deserves two wall hooks rather than one nail, spaced to match the D-rings on the frame. On plaster, use hooks rated for the weight. On brick, use a plug and screw. The frame's own wire does the rest.

Is it cheaper to buy hardware separately?

Almost always. A basic picture hanging kit costs a few units of currency at any hardware store, and buying it separately lets you match the fittings to your wall type instead of to the seller's assumption. The included kit is a convenience, not a saving, and rarely the deciding factor in a purchase.

From the Auvrique collection

Made to order · Every size