What Comes in the Box With a Slevogt Print

A direct answer on hanging hardware, framed and unframed, with the caveats that decide whether a kit saves money or sits unused in a drawer.

Auvrique Editorial · Fine Art Editions

The short answer

Auvrique does not currently offer Max Slevogt editions, so there is no Slevogt print hanging kit to include. As a general rule, framed posters and canvas editions ship ready to hang with mounting hardware included, while unframed prints ship rolled or flat with no hardware at all. Confirm the inclusion before checkout.

The Short Answer on Hanging Kits

Auvrique does not currently list Max Slevogt editions, so the question has no live answer on this site. The honest version is this. Most sellers of framed posters and canvas editions include a hanging kit as standard, because the product only works if it goes on a wall. Unframed prints are the exception. They ship flat or rolled, and hardware is your problem.

The practical move is to read the product page, not the category page. Inclusion varies by format and by seller, and a kit can mean anything from a single nail to a full set of hooks and wall anchors. If a listing is silent on hardware, assume there is none and budget a few euros for hooks. That assumption costs less than the reverse. For a comparison of formats before you buy, see the piece on choosing between a canvas print and a framed poster choosing canvas or framed poster.

What a Hanging Kit Usually Contains

Kits differ, but the contents fall into a narrow range. A framed poster typically needs two hooks and a nail or screw per side, since the frame carries its weight on the hanging wire or on the D-rings. A canvas edition stretched on a wooden bar is lighter per square centimetre and often hangs from a single centre hook. Neither format needs specialist equipment.

The hardware you supply yourself matters more than the hardware that ships in the box. Wall type decides everything. Plasterboard needs anchors, masonry needs a masonry bit, and a solid timber stud needs neither. A kit designed for one wall type fails quietly on another, which is how prints end up on the floor. Check what your wall is made of before the print arrives, not after.

Typical kit contents

Two hooks or screws sized to the frame weight
A nail or wall plug suited to standard drywall
A hanging wire or sawtooth bar already fitted to the frame
Occasionally a small spirit level, though a phone does the same job

Ready to Hang Means Ready to Hang

The phrase causes confusion, so it is worth pinning down. Ready to hang means the print arrives with its frame, its canvas stretcher bars, and its hanging fittings already assembled. It does not mean the wall is prepared, and it does not mean a kit is included. A framed piece can be ready to hang and still expect you to supply the hooks.

If avoiding extra cost is the concern, the arithmetic is simple. A basic hook set costs very little, so a missing kit is a minor annoyance rather than a real expense. The costlier mistake is buying unframed when you wanted framed, or buying a size your wall cannot take. Both of those are settled before checkout, and the small room sizing guide sizing a print for a small room covers the second. Shipping questions, including how prints are packed, are answered separately shipping times for prints.

The hardware in the box matters less than the wall you put it in.

Format	Hardware included	Ready to hang
Framed poster	Usually hooks and fixings	Yes
Canvas edition	Often a single hook fitting	Yes
Unframed print	No	No, frame it first

What to expect by format

Key takeaways

Auvrique does not currently sell Max Slevogt editions, so no kit applies here.
Framed and canvas editions from most sellers include hanging hardware as standard.
Unframed prints ship without hardware in nearly every case.
Wall type, not the kit, determines which fixings you actually need.

Related questions

Do framed prints usually include a hanging kit?

Most do, because a framed print is sold as a finished object. Typical contents are two hooks and matching fixings, with the wire or sawtooth bar already attached to the frame. Listings vary, so check the product page. If hardware is not mentioned, assume it is not included and buy hooks for a small amount locally.

Do canvas prints need a hanging kit at all?

Often less than framed work. A stretched canvas hangs from a single centre point on a hook, and many canvas editions arrive with a fitting already attached to the stretcher bar. You may need nothing beyond one hook and, on plasterboard, a wall anchor. Heavy or very large canvases benefit from two points to keep them level.

What hardware do I need for a plasterboard wall?

Standard hooks pull out of plasterboard under any real weight, so use self-drilling anchors or toggle bolts, or screw into a timber stud if you can find one. For masonry, use a masonry drill bit and wall plugs. The kit that ships with a print is usually rated for the lightest common wall, so upgrade the fixings if yours is not.

From the Auvrique collection

Made to order · Every size