Carl Buchheister prints do not include a hanging kit

The question sounds simple, but the answer depends on format, supplier and how much hardware you already own. A straight yes or no misses the buyer who needs to know what arrives and what does not.

Auvrique Editorial · Fine Art Editions

The short answer

Carl Buchheister prints do not come with a hanging kit from Auvrique. The editions available are reproductions, and the standard package is the print itself, mounted or unmounted, with no separate hardware. If you need a kit, plan on buying one separately before the print arrives. The cost of a basic kit runs from a few pounds to around twenty, depending on weight and finish.

What arrives in the box

A reproduction print arrives as the image, the surface and whatever framing or backing the edition specifies. A hanging kit is a separate accessory, not part of the print itself. Suppliers who include hardware usually say so plainly, because it changes the price and the shipping weight. When a listing is silent on the point, assume nothing is included. That assumption is safer than unpacking a print and finding a bare wall ahead of you.

The buyer who wants installation convenience should decide that before placing an order. A framed poster needs a different fix than a stretched canvas, and a canvas that arrives ready to hang still needs a wall that can take the weight. None of that is complicated. It just needs to be settled in advance, not after the print is on the floor.

What you need to hang it yourself

A basic hanging kit usually contains two D rings, a length of cord or wire, and the screws that fit your wall type. For a lighter print, a single adhesive hook can be enough, though that is a temporary answer rather than a permanent one. Heavier frames need a screw and plug, and the right plug depends on whether the wall is plaster, brick or drylined.

The cost is small relative to the print, and the hardware is easy to find. What matters is matching the fix to the weight and to the wall. A print that falls because the wrong anchor was used costs more than a kit ever would. If you are unsure, ask the supplier what the finished piece weighs before you buy any hardware.

List_title:

List_style: bullet

Items: [

Check the weight of the finished print before buying hardware

Match the wall fix to plaster, brick or drylined surface

Use a kit with two D rings for anything over a few kilograms

Do not rely on adhesive for a framed piece you intend to keep

List

A reproduction print arrives as the image, the surface and whatever framing or backing the edition specifies.

Key takeaways

A reproduction print arrives as the image, the surface and whatever framing or backing the edition specifies.
A basic hanging kit usually contains two D rings, a length of cord or wire, and the screws that fit your wall type.

From the Auvrique collection

Made to order · Every size