Ready to hang prints arrive with the hardware needed

The short answer is yes for most framed and canvas editions, but the exact contents shift with the format. Knowing what arrives in the box lets you plan the wall before the crate opens.

Auvrique Editorial · Fine Art Editions

The short answer

Most ready-to-hang prints ship with the hanging hardware already fitted or included. A framed poster usually arrives with the frame assembled and hanging hardware attached to the back. A canvas print typically comes with the canvas stretched and ready to hang, sometimes with a small kit of hooks or wire. The exact contents depend on the format you choose, so check the product page before ordering.

What arrives in the box

A framed poster usually arrives as a single assembled unit. The frame is already joined and the print is mounted behind glass or acrylic. Hanging hardware is typically fixed to the back, either a wire stretched between two hooks or a set of D rings. You open the box, remove the packing material, and the piece is ready to go on the wall. Some suppliers include a small packet of extra fixings, but the core hardware is already in place.

A canvas print works differently. The canvas is stretched over a wooden frame before it leaves the workshop, so the surface is already taut and finished. Many canvas editions ship with a set of hanging clips or a simple wire system attached to the stretcher bars. You do not need to stretch or mount the canvas yourself. The box may also contain corner protectors or foam, which you discard after unboxing.

What accessories come with art prints

The accessories that come with art prints vary by format and by supplier. A framed poster may include a dust cover on the back, a backing board, and the hanging hardware already fitted. Some orders add a packet of wall anchors or screws for heavier walls, though many frames are light enough for a single hook in a stud or a solid wall. A canvas print may include hanging clips, a wire, or a simple sawtooth hanger attached to the top stretcher bar.

If you want to know exactly what accessories come with art prints before you order, read the product page and the packing notes. The description usually lists whether the hanging hardware is pre fitted or supplied separately. When in doubt, assume you will need a hook or nail suitable for the wall type and the weight of the piece. A framed poster on a solid wall often needs only one good fix. A larger canvas may need two points to keep the wire level.

Typical contents by format

Framed poster: assembled frame, print behind glazing, hanging wire or D rings already fitted
Canvas print: stretched canvas on a wooden frame, often with clips, wire, or a sawtooth hanger
Both formats: packing material and corner protection, which you remove and discard
Optional extras: a small packet of screws or wall anchors for heavier pieces on certain walls

Unboxing and hanging without extra assembly

Unboxing a ready-to-hang print is mostly a matter of removing the packing without scratching the surface. Open the box flat on a table or floor, cut any tape carefully, and lift out the piece by the frame or stretcher bars rather than by the print surface. For a framed poster, check that the glazing is clean and that the hanging hardware sits level before you lift it toward the wall. For a canvas, confirm that the corners are intact and that the stretcher bars are square.

Hanging is the same mechanics as any framed piece of similar weight. Mark the wall at the height you want, fit a hook or nail suited to the wall material, and hang the wire or clips. A single fix works for lighter pieces on a solid wall. Two fixes are safer for a larger frame or a wall that may not hold a single point well. If the hardware supplied does not suit your wall, use a separate hanging system rather than forcing the supplied fittings.

The hardware is usually already fitted. The real work is removing the packing without scratching the surface.

Format	Hanging hardware	Extra items
Framed poster	Wire or D rings, usually pre fitted	Backing board, dust cover, packing
Canvas print	Clips, wire, or sawtooth hanger	Stretcher frame, corner protectors, packing
Both formats	Ready to hang once unpacked	No stretching or mounting required by the buyer

Contents by format

Key takeaways

Framed posters usually arrive assembled with hanging hardware already attached to the back.
Canvas prints arrive stretched and ready to hang, often with clips, wire, or a sawtooth hanger.
Packing material and corner protection are included and should be removed and discarded.
Check the product page to confirm what accessories come with art prints before you order.

Related questions

Do I need any tools to hang a ready-to-hang print?

Usually no tools are needed to hang the piece itself, because the hardware is already fitted. You may need a hammer or a drill to put a hook or nail into the wall, depending on the wall material and the weight of the piece. A small spirit level helps keep the wire straight, but it is not essential for a single hanging point.

What if the supplied hanging hardware does not suit my wall?

Use a separate hanging system that suits the wall and the weight of the piece. A framed poster on plaster or drywall may need a wall anchor or a hook rated for the weight. A canvas on a heavier stretcher bar may need two fixing points rather than one. The supplied hardware is a starting point, not a requirement.

Can I hang a canvas print without a frame?

Yes, a canvas print is designed to be hung as a stretched piece without an additional frame. The canvas is already mounted on a wooden stretcher bar, so it hangs as a finished surface. Some people add a frame later for a different look, but it is not required for hanging.

From the Auvrique collection

Made to order · Every size