Permeke prints arrive with hanging hardware included

The short answer is yes, but the kit is basic and assumes a standard wall. Buyers with masonry, uneven studs, or large formats need to plan separately.

Auvrique Editorial · Fine Art Editions

The short answer

Yes. A Permeke print order ships with a basic hanging kit, usually two screws and matching wall anchors sized for the frame weight. The kit covers a standard drywall installation. It does not include a drill, a level, or hardware for masonry or heavy canvas. If your wall is not standard drywall, plan to buy what the kit does not cover.

What the kit contains

The hanging kit is deliberately minimal. It is designed to get the print on the wall without a separate trip to the hardware shop for a standard interior. You get two screws and two wall anchors matched to the frame weight. That is the full set. Nothing else is tucked into the box.

The weight of the print matters here. A framed poster sits in a different range from a stretched canvas, and the included anchors reflect that difference. If you are choosing between the two formats for a wall you already know well, the choice changes what you will need on the other side of the installation. buy the framed poster or order the canvas edition and the kit will be built around the weight of whichever one you pick.

When the kit is not enough

The kit assumes a standard drywall surface and a frame that hangs within its rated range. It does not cover masonry, brick, concrete, or a wall with uneven studs. It also does not cover a print heavy enough to need a stud mount or a French cleat. If any of those describe your wall, the kit is a starting point, not the whole job.

The practical gap is usually tools, not hardware. The kit does not include a drill, a level, or a pencil. You will need those on your own. If you are unsure whether your wall will hold the anchors supplied, test one in an inconspicuous spot first. That small step removes most of the risk before you commit to the full installation. read the shipping and delivery notes for what travels in the box and what does not.

What the kit does not cover

A drill, a level, or a pencil for marking the wall
Hardware for masonry, brick, or concrete surfaces
Stud mounts or French cleats for heavier pieces
Replacement anchors for walls that differ from standard drywall

How to check before you hang

Before you open the kit, weigh the print or check the product page for the frame weight. Match that number to the anchor rating in the kit. If the two are close, the supplied hardware is likely fine for drywall. If the print is near the top of the range, move a screw up into a stud or use a heavier anchor.

If you are still deciding on a piece, the format choice changes the installation more than the image does. A framed poster and a canvas carry differently, and the wall you have already in place should decide the format more than the mood of the room. compare the two formats before you commit, because the hanging question is easier to answer once the format is fixed.

The kit is built for a standard wall and nothing more. Everything else is your problem to solve before the print goes up.

Key takeaways

A Permeke print order ships with a basic hanging kit of two screws and two wall anchors.
The kit covers standard drywall only and does not include tools or masonry hardware.
Large formats and non-standard walls need separate hardware or a different hanging method.
Check the frame weight against the anchor rating before you hang anything.

Related questions

Does the hanging kit work for a brick or concrete wall?

No. The supplied anchors are sized for standard drywall. Brick, concrete, and masonry need a different anchor or a masonry screw, and the kit does not include those. Buy the right hardware separately before you drill into a hard surface.

Do I need to supply my own drill and level?

Yes. The kit includes only screws and wall anchors. You need a drill to make the holes, a level to keep the print straight, and a pencil to mark the positions. None of those tools are included in the box.

What if the print is heavier than the anchors are rated for?

Move one hanging point into a stud, or use a heavier anchor rated above the frame weight. If the print is near the top of the kit's range, do not rely on the supplied anchors alone. A stud mount or a French cleat is the safer choice for a heavy piece.

From the Auvrique collection

Made to order · Every size